Showing posts with label Tutorial. Show all posts
Showing posts with label Tutorial. Show all posts

Monday, March 17, 2014

How to Get Summer Ready Skin + Exfoliating Scrub Recipe

Summer is approaching! Did you hear me right? Summer is almost here! Never you mind these intermittent days of snow. We shall merely pretend they don't exist. I can feel the sun right on the cusp of warming my skin each and every day. 

Now that I'm finally in a place where I can get my health under control, and set some goals for myself, I'm adding to the list my super soft skin. Once upon a time I had the softest, shimmeriest (is that a word?) skin. It was perfectly tanned, had a slight glimmer, and I never had to wear foundation. Oh how I miss this! So I've stocked up on the essentials I once used for my own daily DIY exfoliation treatments, and would love to invite you lovelies to have this same delectable skin. It's so easy, too. Just a few all-natural ingredients from the supermarket.

WHAT YOU NEED
  1. Loofah
  2. Pumice stone
  3. Body wash/cleanser
  4. DIY Exfoliating scrub
  5. Moisturizing lotion (low alcohol content)

GET DOWN TO WORK
  1. Use your loofah or a dry cloth to remove any dead skin cells and to open up your pores, before you get in the shower.
  2. Starting from the feet and moving up, toward your heart, begin scrubbing your body with your cleanser.  By going upward in a circular motion, you will increase your body's circulation. Be gentle on sensitive areas such as your face and bikini line. 
  3. Use your pumice stone to remove any dry or cracked calluses on your feet.
  4. Give your body a good once-over with your homemade exfoliating salt scrub.  I'll include my quick and easy recipe at the end of the this post. Rinse well.
  5. Once you're out of the shower, towel dry, leaving your skin somewhat damp. Apply a moisturizer all over your freshly exfoliated skin. Give the lotion a minute to dry and really soak into your skin before getting dressed. You don't want your garments absorbing most of the moisture. My favorite moisturizing lotion is Eucerin healing cream. But whatever you're using, be sure one of the first few ingredients is not alcohol. Many scented or otherwise inexpensive lotions contain a lot of alcohol, which dries out your skin. Once my tan has started to set, I love to use Jergens Natural Glow to slowly build upon it.
NOTE: Don't exfoliate on freshly waxed or shaved skin, or on skin that is sunburned or has any open wounds. This can be very painful and will most likely burn. Believe me, learned that the hard way!

DIY SALT SCRUB RECIPE 
  • 1 cup almond oil
  • 1 cup course sea salt
  • 10-12 drops of vanilla scented oil (or preference)
  • Mason jar or other container with lid

Mix all ingredients into your chosen container. You can use more and fewer drops of your scented oil, depending on how strong you prefer your scent to be. Each time you use your homemade salt scrub, shake or mix it well first.
Thanks for reading!
Steph
Sharing with:
Craft-O-Maniac || The Girl Creative || C.R.A.F.T. || Still Being Molly || New Nostalgia || Ladybug Blessings || Sugar Bee Crafts || Tip Junkie || Seven Thirty Three || Sew Much Ado || Someday Crafts || Not Just a Housewife || Free Pretty Things For You || Chic On A Shoestring Budget || The Shabby Nest || Peek-a-boo || Be-You-Tiful Party || Glitter Glue & Paint || The Sits Girls || Tatertots & Jello ||
The 36th Avenue

Friday, March 14, 2014

How to Catch a Leprechaun | DIY Craft Ideas

Monday is St. Patrick's Day and my kids are both excited and frightened. Excited because they get to wear green to school Monday, excited about the prospect of their being gold and rainbows, but nervous of the possibility of a sneaky little leprechaun playing his tricks in their classrooms. So I rounded up the many ways we could catch one of these tricksy little green guys,
 Lure him in with rainbows with The Classroom Creative's trap.
Recipe by Photo gives a step-by-step photo tutorial to trap him in a little cake cage. Gold, the perfect trap cover and irresistible to Leprechaun's.
 Make him work for that gold with Snoodle Doodle, then BAM, straight into a too-tall trap!
 Even Leprechaun's get tired from all those pranks. Modern Parents Messy Kids tricked him with a little vacant hotel.
Call me the mean mom, but I'm willing to take A Differentiated Kindergarten's idea and let my kids think a leprechaun snuck into our house and played his hijinx on us. And stopped to use the bathroom along the way. Too bad he is too rude to even bother flushing.


Have a fun St. Patty's Weekend,
Steph

Thursday, January 23, 2014

DIY Geometric Cork Board


First I'd like to apologize for the lack of personal posts. Sadly, my rechargeable batteries have gone caput. They will no longer hold a charge. These are the last photos I was able to get out of it. It's very saddening. My camera gets so much love, and now it is feeling so very lonely, sitting there upon my desk all alone, neglected. Single-mom's Budget Syndrome has prevented me from being able to spoil it and buy it new batteries. I've had to put what extra money I have into some health expenses. Hooey is what I say!

Okay, I'll get to the task at hand now, this lovely diamond painted cork board I hung in my studio. I was inspired by this blog post from The Happy Home when I stumbled upon it on Pinterest. Oh, good ol' Pinterest! I had picked up a pack of cork tiles at Big Lots over the summer and they had been sitting here for months. Then Ms. Belinda came to my rescue and was just the right inspiration for me!

All you'll need are:
Painters Tape
Paint
Brush

Simple enough, tape off your lines. I did a mix of skinny and thick, because both are beautiful and can complement the other lovingly.
 Make sure all your lines match up. This is also where I would recommend taking an extra piece of tape and labeling each square 1-4. The reason I say that, is I didn't and they got mixed up, then I had to play a puzzle game to get the lines matched up again. Good thing I like puzzles!
 And it is reasons like this I love Folkart. I have mixed metals all throughout my house, so I used Pearl White and Royal Gold.

Yeah, that's a shout out to my girl, Julie at Julie Ann Art. Buy her cards. Seriously. People die laughing when they read all the cards I buy for Logan. I already have his Valentine's Day card ready. Her new cardstock is like magic. 
I finished off my little corky space with some tacks I DIY'ed. Those are just scrapbooking embellishments I super glued onto tacks. Now I have fancy tacks to hold up all the junk that would normally get thrown on my cutting table.

And there ya go. An inexpensive and easy DIY to add a pop of geometric style to your plain white apartment walls. 

Love and that jazz!
Steph

Monday, January 6, 2014

Create Gold Foil Text in Photoshop

I have been in love with the new trend of metallic gold lettering in graphic design. Who doesn't love shiny text! I bet if you do, you've been wondering how to get it. I mean, your text doesn't just come in those fancy letters. There is no Hex code for that metallic sheen. So I knew this would make for a great tutorial to share with you all. 

Open the canvas you will be working on, as well as the gold foil texture you want to use. You can see with the arrows I have the Create Foil Text document open and the Foil Background open. THIS is the free gold foil background I used for this tutorial. Another great gold foil digital texture pack is THIS one from Mommyish.

Working on your Foil Text canvas, create a new layer. In Photoshop, the small piece of paper with the corner marked is the new-layer icon. You can see in the layers pallet, Layer 1 has been created. You can rename this by double-clicking it if you wish. I did not for this tutorial since it is the only additional layer I'm working with.

 Toggle over to your window with the gold foil background. Select the whole thing and copy it.

Toggle back over to your canvas and paste the gold foil background to the layer you just created. If you look at Layer 1 in your layers pallet, you now see it has a gold rectangle in it, displaying to you what is in that layer. Be sure you have Layer 1 highlighted before you paste the background to it.

First, move the layer up or down until it is directly over the text you want to add texture to. You can easily do this by clicking and dragging. Now right-click on Layer 1 and select Create Clipping Mask.

You just clipped two layers together! And only with the click of a button! If you look at Layer 1 in your layers pallet, you will see a small downward pointing arrow on the left side. That arrow indicates that that layer is clipped to the one below it, and whatever is in that layer (Layer 1) will reflect only within the layer it is clipped to.

Adjust the size and/or position of the gold foil texture until it is how you like it. This is easily done by highlighting Layer 1 in the pallet (it should be selected on your canvas as you see in the previous photo), press V on your keyboard to select your Move Tool (or toggle it on the left [see photo]) and adjust the size and position. Another quick note: holding Shift while adjusting one of the corners will maintain the proportions of the background layer.

There, you're done! Your text is gold and shiny and beautiful! Give yourself a little pat on the back.

What other things would you like to learn to do in Photoshop? Let me know in the comments or send me an email: newlymynted@gmail.com. You can also follow us on Facebook to stay up-to-date on new tutorials.

XO,
Steph

Tuesday, November 12, 2013

Uses for Old Sweaters

Winter is approaching, bells are beginning to sound. Soon snow will be falling soft. While I am not a fan of cold weather, I love feelings of winter. Cozy sweaters paired with your favorite boots. Curling up under a warm blanket with a cup of hot cocoa and a good book. Prepping for the holidays. Yes, I have already begun. I have started my list of handmade gifts. A hint: I made my kids take a bag outside yesterday and fill it with dirt for Snookums present.

Since I do love a cozy sweater, I have been perusing Goodwill for them. My endeavors have failed time and again, as they are almost never in my size and the ones that are always seem to be picked pretty bad. This is where my sweet little brain got to thinking, something ought to be done with all those pretty sweaters I keep seeing. 

Skip ... skip ... skip, off to Pinterest we go ... I scoured their pages for some of the neatest things to do with those old sweaters. As always, Pinterest did not disappoint. There was so much inspiration!
This is my idea of a cozy blanket! Make a patchwork quilt with old sweaters.
For those bitter chilling days, turn a sweater into a scarf.
I almost always wear socks in the winter time, so these would be perfect for me to make. Turning a sweater into a pair of slippers would also be a great money saver since I do tend wear them out. What can I say, I hate cold feet.
What a perfect way to reuse your kiddos old sweaters they've outgrown from last year. Make them some new slippers and present them under the tree this holiday.
Should've put a bow on it! A great idea if your sweater seems come unraveled: add an embellishment.
I recently accidentally dried my favorite wool sweater. Imagine my poor little heart sinking upon finding it, warm and cozy and ... toddler size as I extracted it from the drier. I was devastated. Thank you, Lana Red Studio, for lifting my spirits with your adorable sweater bag!
Okay, I have to admit. I kind of threw a hissy fit when I saw this. I mean, how ingenious is that? A section of knit placed inside a pump turns it into a bootie. You're welcome!
Thrifty and Chic really did me in with a couple of her ideas. I love the idea of adding temporary winter textures to the home. Designing your home is like designing a brand, you want it to have a certain feel. And I love the feeling of a cozy home when it's chilly out.

Bring your spring cardi to winter by adding some knit to the end. Knitted bliss has a tutorial on how she knitted them together.
Snookums was recently given a nice sweater, but he doesn't wear sweaters. He's hot natured. Therefore, the logical conclusion would be for me to confiscate it and turn it into a sweater for me. Goodwill doesn't need it anyway, right?
Add some pom poms to your life. Seriously. Poofy things are life changing. I swear! There's a reason cheerleaders use them: they're just fun!
This makes me really tempted to splurge on a pair of galoshes. Embellish them with some knitting. 
Nothing wins me over like beautiful embroidery. And floral prints. I am unfamiliar with felting in this manner. I must learn!
This is on my to-do list. Hands down. It's on! I'm thinking of giving some of these sweater rugs as gifts this year too.
Such an original scarf.

Another great use for your kiddos old sweaters. Turn it into a softie for Christmas. 
Update your daughters winter wardrobe with your old sweater. 
Or give yourself a new chic skirt to pair with those tights

Happy inspiration!
Steph
Facebook        Twitter        Pinterest         Instagram        Email

Wednesday, November 6, 2013

Anthro hack: Rosette Pillow Shams

Now that we know how to use our ruffler foot, we're going to be making these darling pillow shams. 

Our inspiration: 
These Rosette Shams from Anthropologie. I fell in love with these and just knew I needed to make them. It gives that extra punch of femininity to my bed. I did consider painting polka dots on my fabric, but I have another pillow cover to make and that fabric has polka dots on it already, so I decided to keep mine a solid color. But if you want polka dots, by all means, paint some on with some fabric paint. Go hog wild! Have a blast!

You will need:
1.5 yards of fabric
Coordinating thread
Sewing machine
Standard presser foot
Ruffler foot
Scissors
Cut:  THESE DIMENSIONS ARE FOR A STANDARD SIZE PILLOW, 29" X 21".
Seam allowances are included with the measurements
Back of sham - 36 x 21.75 inches (cut 1)
Front middle section - 15.5 x 21.75 inches (cut 1)
Front ruched section - 7.25 x 42 inches (cut 2) 

With your presser foot properly in place, adjust the ratchet gear feed plate to 6 and your machine's stitch length to 3. Weave your fabric through the cloth guide and begin sewing ruffles down the width of all the ruche sections. It will automatically sew a 1/4" seam. (Check out the Sewing 101 series or the tutorial on how to use the ruffler foot if you need more information.)
Here's a better idea of what you should have when you're done. You will ruffle the width of both sides on each cut you made. The sections will shrink considerably, about 1.5 times their original size, to about the same 21.75" width of your other pieces. Press all of your seams and ruffles, allowing them to lay as they will. You can see some of mine are a little haphazard. That's what you want.
Replace your ruffler foot with your standard presser foot and adjust your stitch length to 2. Right sides together, sew each of the ruche sections to either side of the the middle section with a 3/8" seam. Serge or zigzag (use the smallest stitch length possible) the edge of the seam to finish it off. I'm sorry I don't have a better picture of each section going together. Essentially, you should have the front of your pillow sham fully assembled.
Using a longer stitch length (I use 4), press the seam to the right (toward the ruche section) and straight stitch it down 1/8" from your seam line. This will give your panels more of a profesh look!
Now that we're talking about this being all professional and what not, remember perfection is not necessary in this next step. Find the middle of your ruche section and sew a straight line all the way down. Repeat this step on either side of the middle line you just sewed. We are trying to tame that poofy look you get with such large ruffled pieces, while keeping that professional appeal about it. That's the great thing about shabby chic styles, chic style without the clean boring lines. After all, Perfection is Never an Option!
Cut your back piece vertically down the center. (Remember: it's longer in length than width; cut down the width.)
Pin one half to the left side of the front of your sham and sew it in place with a 3/8" seam allowance. Repeat on the right side with the other half of the back.
Press the seams and serge/zigzag each hem to finish them off. You should now have one really long strip of fabric. We're going to close that off soon and shape our sham.
Fold the edge of the right side of the sham 1/2" and press. Fold it again, press again, then sew 1/4" inch from the edge of the hem.
Repeat the previous steps on the left side of the sham, but fold and press this side 1".
Now let's create our cases. Fold the left back piece over, right sides of the sham facing. This side should fall several inches to the right of the center of the sham. Then fold the right side of the back of the sham over. (Be sure you fold each side along the outside seam of each ruched section. I accidentally folded on the inside seam of one and couldn't quite figure out for a bit why my sham wasn't laying right.)
Pin all the away across the top and bottom and sew the seams into place with a 3/8" seam. Be sure the one inch hem is on the inside and the one half inch hem is on the outside before you do. This makes a difference when you go to turn it. Clip your corners, turn it right side out, and you're done. You've created beautiful shams. For a fraction of the cost. Congratulations!
Happy sewing!
Steph  
Facebook        Twitter        Pinterest         Instagram        Email